website Skip to content

Haldex Gen4

SKU HALDEX04.113927

Verify fitment with your vehicle

(Change vehicle)


  • Volkswagen CC B6 3.6L VR6 4Motion
  • Volkswagen Passat B6 3.6L V6 4Motion
  • Volkswagen Tiguan 5N 2.0L TSI 4Motion


The Haldex Performance/ Borg Warner Part will greatly improve the performance and handling of your 2008.5-up VW Passat 4-Motion, CC and 2008.5-2013 Tiguan. The kit consists of a new electronically controlled valve body, gasket, necessary hardware, and installation instructions.

By re-tuning your vehicle's AWD system, power is more aggressively directed to the rear wheels under a wide variety of driving conditions. This results in more neutral handling characteristics and better off the line acceleration. This system does not interfere with ABS or Traction Control Systems.

The performance software for Gen 4 has an option where the driver can choose between 3 different parameter settings.

Option 1: As default when no Remote Control is installed the software is fixed in Race mode which will give the car a sportier and more natural handling performance.

Option 2: Installing the remote control the driver will have the ability to choose between 3 different parameter settings:

- Eco: Developed for fuel efficiency and increased durability of driveline parts. This tuning reduces the torque transfer during normal highway driving (coasting), but will immediately engage the system if a wheel starts to slip to prevent decreased traction capabilities. This mode is recommended to be used when 4 wheel drive is not a high priority as in highway driving, commuting, etc.

- Stock: Standard mode is similar to the original setting in the standard vehicle.
This mode is recommended to be used for normal driving.

- Race: Race mode will increase close to maximum torque transfer to the rear axle during accelerations and active driving. It also reacts faster due to the driver’s intentions and locks up for more torque before actual torque is available from the engine.

All safety features work as in the original software, for example during ABS braking or an ESP intervention the coupling will stop transferring torque to avoid
interference with the car's safety systems.


For 2008 vehicles: Haldex units that start with Part # 0AV use Gen 2, units with Part # 0BS or 0AY use Gen 4.


2008.5-UP VW Passat and CC 4-Motion

2008.5-2013 Tiguan 4-Motion

This a simple plug-n-play application, no modifications necessary!

Replaces original equipment Haldex control unit.

Installation Instructions