GEAR 300 FLUID LINE

GEAR 300 75W90

DESCRIPTION: 100% synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronized or not synchronized gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.

TYPE OF USE

All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCE

Standards: API GL-4 and GL-5 / MIL-L-2105D

• 100% synthetic extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.
• 0% shear loss: Unshearable oil film in extreme conditions.
• Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 standard, July 1998 update.
• Very high lubricating power which decreases friction and wear.
• 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
• Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
• Less effort required on the gear lever to shift the gears.
• Suitable for any type of seal and yellow material used in gearboxes design.
• Anti-corrosion, Anti-foam.

RECOMMENDATIONS

• Oil change: according to manufacturer’s recommendations and adapt according to your own use.
• Before use always refer to the owner manual or handbook of the vehicle.

PROPERTIES

• Viscosity grade SAE J306 75W-90
• Density at 20°C (68°F) ASTM D1298 0.897
• Viscosity at 40°C (104°F) ASTM D445 72.6 mm²/s
• Viscosity at 100°C (212°F) ASTM D445 15.2 mm²/s
• Viscosity index ASTM D2270 222
• Flash point ASTM D92 200°C / 392°F
• Pour point ASTM D97 -60°C / -76°F

Notes

1L bottle.

GEAR 300LS (LIMITED SLIP) 75W90

DESCRIPTION: 100% synthetic lubricant for all mechanical transmission of high performances and racing cars. For synchronised or not synchronized gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials with limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. 0% shear loss: Unshearable oil film in extreme conditions. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow comfortable gear shifting.

TYPE OF USE

All hypoid differentials with limited slip system, gearbox with integrated limited slip differential, mechanical transmission, synchronized or non-synchronized gearbox, transfer gearbox operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed when transmission efficiency as to be improved compare to a 75W-140 grade.

PERFORMANCE

Standards: API GL-5

• 100% synthetic extreme pressure lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time.
• Contains a special friction modifier to avoid noisy or dragging limited slip differential.
• Very low shear loss by the severe test KRL 20H, thanks to the synthetic ester base with very high viscosity index (VI).
• Very high lubricating power which decreases friction and wear.
• Fluid at low temperature to allow easier gear shifting in cold conditions. Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
• Less effort required on the gear lever to shift the gears.
• Improved transmission efficiency compare to a 75W-140 grade.
• Suitable for any type of seal and any type of material used in gearbox and limited slip differential design.
• Anti-corrosion, anti-foam.

RECOMMENDATIONS

• Oil change: according to manufacturer’s recommendations and adapt according to your own use.
• Before use always refer to the owner manual or handbook of the vehicle.

PROPERTIES

• Color Green
• Viscosity grade SAE J 306 75W-90
• Density at 20°C (68°F) ASTM D1298 0.904
• Viscosity at 40°C (104°F) ASTM D445 109.6 mm²/s
• Viscosity at 100°C (212°F) ASTM D445 16.4 mm²/s
• Viscosity index ASTM D2270 161
• Flash point ASTM D92 200°C / 392°F
• Pour point ASTM D97 -42°C / -43.6°F

Notes

1L bottle.